Apollopipes Apollopipes
Apollopipes Apollopipes Apollopipes Apollopipes Apollopipes Apollopipes Apollopipes Apollopipes Apollopipes Apollopipes Apollopipes Apollopipes
Apollo Pipe Apollo Pipe
Apollo Pipe
Apollo Pipe
Apollo Pipe
Apollo Pipe
Apollopipes
Today's Most Advanced Hot and Cold Water Plumbing System…… For The New generation
CPVC Plumbing System


CPVC Plumbing System
CPVC Plumbing System
CHLORINATED POLY VINYL CHLORIDE [CPVC] pipes and fittings, under the brand name APL APOLLO, are the latest addition by APOLLO PIPES LTD. to its ever growing kitty of quality products, manufactured for its discerning customer.

These Pipes & Fitting are intended for use in residential and commercial, hot and cold, potable water distribution systems. APOLLO CPVC Pipes & Fittings are produced from a specialty blend of chlorinated polyvinyl chloride material with unique physical properties desirable for piping application.

The compounds used for extrusion of the pipes meets the requirements of ASTM Class 23447 B as defined in ASTM Specification D1784. These pipes have a maximum service temperature upto 93°C and have a design stress of 2000 PSI.

Pipes are produced in copper tube size (CTS) from 15 mm (1/2'') to 50 mm (2'') with two different standard dimensional ratios-SDR-11 and SDR-13.5. The fittings are produced as per SDR 11. All APOLLO CPVC SDR 11 and SDR 13.5 pipes are made from identical CPVC compound material having same physical properties. The CPVC fittings are manufactured from compound material which meets all the requirement as per ASTM standard. CPVC pipes of Copper Tube Size (CTS) dimensions can also be applied to CPVC (IPS) dimensions by using IPS x CTS fitting. The CPVC pipes from 15 mm (1/2'') to 50 mm (2'') are also produced as per IS 15778 standard in both class that is Class 1 (SDR 11) and Class 2 (SDR 13.5).

CPVC Plumbing System is approved for contact with potable water in wide range of countries including USA, UK, Canada, Germany, France, The Netherlands, Middle East among others. CPVC Pipes are known to last for over 50 years after installation.

Apollopipes
CPVC Pipes are available in sizes ranging from 15 mm (½”) to 50 mm (2”). There are two different Standard Dimensional Ratios (SDR) in which they are manufactured namely: SDR-11 and SDR-13.5. All fittings are manufactured as per SDR 11. Since both SDR 11 and SDR 13.5 pipes are made from the same compound material, they have the same physical properties. The CPVC fittings are manufactured from compound material as per the relevant ASTM standard requirement.

Apollopipes
CPVC pipes are used for hot and cold potable water flow in Residential Buildings, Commercial Buildings, Hotels, Educational Institutions, Swimming Pools etc. that require hygienic and uncontaminated supply of water. Because of better chemical and heat resistant properties when compared to other thermoplastic materials, they can be used in Chemical Factories & for other Industrial requirements too.

Apollopipes
  • Excellent resistance to corrosion and chemical attacks -
    Lifeline is absolutely free from corrosion and offers excellent resistance to great number of chemicals like strong mineral acids and bases.
  • Ideal system for carrying drinking water
    Lifeline is an absolutely free from corrosion and negative biological effects. It does not break down under the harshest water condition hence the quality of water never deteriorates.
  • Light weight, easy and quick assembly -
    Together with simple, solvent cement jointing method results in extensive saving on time and labour.
  • Tough and Rigid material -
    CPVC has a much higher strength/modulus than other thermoplastics used in plumbing applications. This material can withstand high pressure. Due to its tough and rigid material property, it requires less supports with minimum offsets/looping.
  • Simple and leak proof joints -
    Jointing can be done speedily with special solvent cement supplied by the company which ensures 100% leak proof joints.
  • Superior insulation properties -
    Lifeline has better insulation properties than metal pipes reducing heat loss and insulation requirement.
  • Fire Resistance -
    Lifeline CPVC does not support combustion.
  • CPVC Pipes and Fittings have a natural immunity to scaling, corrosion, and microbiologically influenced corrosion. It has a general life expectancy of 50 years & over, a longlow-maintenance service life as compared to traditional metallic systems.
  • The pipes have a higher flow rate due to the pipes being smoother & having better friction resistance properties.
  • Being light in weight, CPVC piping systems are easier to handle and install. Fabrication is quick, simple, and clean as there is no need for a soldering torch or heavy equipment. Installation is done by solvent cement joining process which is quick and leak-proof if properly done.
  • CPVC Pipes & Fittings have better Flame & Smoke resistant characteristics when compared to other non-metallic piping options. They have a very high ash-ignition temperature and are not combustible as they do not sustain burning.
  • Because of its high heat & pressure resistant properties, CPVC Pipes are the preferred choice for Hot & Cold water plumbing in Residential & Commercial Buildings as well as in transporting of hot & pressurized water for industrial usage.
  • CPVC Pipes & Fittings have inertness or excellent chemical resistance properties to a wide range of chemicals. It is unaffected by chlorinated water, which is essential for it to be used safely in potable water supplies.
  • CPVC has lower Thermal Expansion & Conductivity as compared to other thermoplastics. Therefore, distortion of pipelines due to flow of hot fluids & thus leading to looping is reduced. It is also more energy efficient as there is much lesser heat loss as compared to other materials, especially metal thus exhibiting better insulation properties
  • Manufactured from quality raw material.
  • No electric source required for installation.
  • Extraordinary Safety and hygiene
  • Enviable Reliability
  • Enormous Cost savings
Apollopipes
APL APOLLO CPVC Pipes are manufactured as per the standards given below:
ASTM D1784 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds.
ASTM D2846/IS:15778 Specification for Chlorinated Poly Vinyl Chloride (CPVC) Plastic Pipes for Hot & Cold water distribution systems.
ASTM F493 Standard Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe & Fittings.
ASTM F441 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, SCH 40 & 80.
ASTM F438 Socket-Type Chlorinated Polyvinyl Chloride Plastic Pipe Fittings. SCH 40.
ASTM F439 Socket-Type Chlorinated Polyvinyl Chloride Plastic Pipe Fittings. SCH 80.

Apollopipes
Apollo CPVC Pipes & Fittings Apollo Pipe


Apollo Pipe
Apollopipes
cPVC Fittings
TEE

cPVC Fittings
Socket

cPVC Fittings
Brass Threaded Female Tee

cPVC Fittings
End Cap

cPVC Fittings
II Brass Male Thread Adapter
cPVC Fittings
45 Deg. ELBOW

cPVC Fittings
Reducing Socket

cPVC Fittings
Reducing Bushes

cPVC Fittings
Brass Threaded Female Elbow

cPVC Fittings
II Brass Female Thread Adapter
cPVC Fittings
Elbow 90°

cPVC Fittings
Reducing Tee

cPVC Fittings
Compact Ball Valve

cPVC Fittings
Reducing Elbow







CPVC Products
° CPVC Pipes
° CPVC Fittings
Apollo Pipes
uPVC Products
° uPVC Pressure Pipes° uPVC Column Pipes
° Well Casing Pipes° Plumbing Systems
° SWR Drainage System

Apollo Pipes
HDPE Products
° Pressure Pipes° Sprinkler Systems
° Cable Ducts
Apollo Pipes
Steel Pipes & Hollow Sections
° Hot Dip Galvanized & Black Steel Pipes
° Pre Galvanized Steel Pipes
° Steel Hollow Sections
E-mail Product Spectrum Contact Home