HDPE PIPES & COILS

Introduction

APL APOLLO Pipes manufactures a wide range of Polyethylene pipes, High Density (HDPE) conforming to various standards viz., BIS, BS, DIN & ISO to name a few. HDPE is strongly resistant to stress cracking and has low creep-rupture properties. It comes with excellent insulation properties over a wide range of frequencies and is not chemically active. These pipes are one of the two largest thermoplastic pipelines available and by far the most versatile.

Polyethylene is a thermoplastic polymer consisting of long chains of ethylene or ethane. It is a wax-like thermoplastic with a density less than the density of water. The only two additives added to polyethylene are Carbon Black, within the range limit of 2-3%, to add reinforcement and increase polyethylenes weathering properties and trace amounts of antioxidants. The Pipes & Fittings are offered in PE 63, PE 80 and PE 100 grades, compliance to IS-4984.

Technical Specifications

APL Apollo CPVC Plumbing Pipes are manufactured as per the standards given below:

WHY SHOULD YOU CHOOSE APL APOLLO
HDPE PIPES & COILS?

Light weight, strong, long lasting and maintenance-free

Flexible due to inherent elasticity and can be supplied jointless in long lengths of up to 100m, particularly the smaller diameter pipes

Tough due to high flexural and impact strength

Capable of withstanding high internal and external loads by balancing internal fluid pressure with external soil pressure

Chemically inert and resistant to chemicals and hostile corrosive soil

Strongly resistant to acids, as well as alkalis and can be laid in marshy and corrosive soils without any coating or cathode-based protection

Highly resistant to abrasion and suitable for transportation of slurry, boiler ash, ores, beach sands, etc.

HIGHLY EFFICIENT AS INSULATING MEDIA AND REQUIRES MINIMAL INSULATION WHILE CARRYING CHILLED WATER

Available Sizes

The pipes and fittings are available in 20 mm to 315 mm in PE 63, PE 80, and PE 100 as per IS 4984 & 14333.

CPVC FITTINGS IN SCH 40 AS PER ASTM F- 438

SCH 40 BALL VALVE

SCH 40 COUPLER

SCH 40 ELBOW 90

SCH 40 ELBOW 45

SCH 40 END CAP

SCH 40 FEMALE ADAPTOR PLASTIC THREADED

SCH 40 MALE ADAPTOR PLASTIC THREADED

SCH 40 REDUCING BUSH

SCH 40 Tee

SCH 40 UNION

CPVC FITTINGS IN SDR 11 AS PER ASTM D-2846

MALE ADAPTOR WITH HEXAGANOL BRASS INSERTS

FEMALE ADAPTOR WITH HEXAGANOL BRASS INSERTS

FEMALE ADAPTOR BRASS THREADED

REDUCING FEMALE ADAPTOR BRASS THREADED

REDUCING MALE ADAPTOR BRASS THREADED

REDUCING FEMALE ELBOW BRASS THREADED

REDUCING BUSH

MALE ADAPTOR BRASS THREADED

REDUCING FEMALE TEE BRASS THREADED

FEMALE TEE BRASS THREADED

FEMALE ELBOW BRASS THREADED

FEMALE ADAPTOR PLASTIC THREADED

END PLUG THREADED

ELBOW 45

MALE ADAPTOR PLASTIC THREADED

REDUCING FEMALE ADAPTOR PLASTIC THREADED

TANK CONNECTOR

BALL VALVE

REDUCING TEE

REDUCING ELBOW

REDUCING MALE ADAPTOR PLASTIC THREADED

END CAP

STEP OVER BEND

CROSS TEE

UNION

Tee

ELBOW 90

REDUCING COUPLER

COUPLER

TANK CONNECTOR-PIPE FITMENT

uPVC PLUMBING PIPES AS PER ASTM D-1785

SCH-40 (6 MTR -THREADED)

uPVC PLUMBING FITTINGS IN SCH 40 AS PER ASTM D- 2466

SCH 40 BALL VALVE

SCH 40 COUPLER

SCH 40 ELBOW 45

SCH 40 ELBOW 90

SCH 40 END CAP

SCH 40 FEMALE ADAPTOR PLASTIC THREADED

SCH 40 MALE ADAPTOR PLASTIC THREADED

SCH 40 REDUCING BUSH

SCH 40 TEE

SCH 40 UNION

uPVC PLUMBING FITTINGS IN SCH-80 AS PER ASTM D-2467

STEP OVER BEND

FEMALE TEE BRASS THREADED

FEMALE ADAPTOR BRASS THREADED

THREADED COUPLER

FEMALE ELBOW BRASS THREADED

FEMALE ADAPTOR PLASTIC THREADED

MALE ADAPTOR BRASS THREADED

REDUCING BUSH

TANK CONNECTOR

BALL VALVE

ELBOW 45

REDUCING TEE

MALE ADAPTOR PLASTIC THREADED

END CAP

UNION

REDUCING ELBOW

ELBOW 90

TEE

REDUCING COUPLER

COUPLER

END PLUG

TANK CONNECTOR (LONG)

AGRI PIPES CONFORMING TO IS:4985-2000

AGRICULTURE FITTINGS AS PER IS:7834

FEMALE THREADED ADAPTOR PN10

MALE THREADED ADAPTOR PN10

END CAP PN10

COUPLER PN10

MULTI FLOOR TRAP (W.O. JALI)

REDUCING BUSH

JALI ROUND

PIPE CLAMP

Q TRAP

P TRAP

END CAP PN6

END CAP PN4

VENT COWL

NAHANI TRAP WITHOUT JALI

S TRAP

FEMALE THREADED ADAPTOR (FTA) PN6

END CAP THREADED

MALE THREADED ADAPTOR (MTA) PN6

REDUCING TEE PN4

COUPLER 6 KG

REDUCING COUPLER

TEE